Pipette tip cartridges features and common troubleshooting methods
Pipette tip cartridges are made of high quality 100% ultra-pure, medical grade polypropylene raw material, fully automated production system to produce elongated pipette tips - a new choice to reduce the contamination of pipetting operations-biox007-Letong BioShop
Soft elastic cone for enhanced sealing between pipette and nozzle.
Compatible with all brands of pipettes (Brand, Eppendorf, Gilson, Biohit, Rainin, Thermo, HTL, etc.)
Produced in an ultra-clean environment, free of DNA enzymes, RNA enzymes and pyrogens.
Extra-long design reduces contamination from pipettes
Resistant to autoclave treatment
ISO13485 certified
Clean, hydrophobic surface with very low liquid adsorption
Main features of pipette tip cartridges
1. Pipette rod can be rotated 360 degrees, without tools can be removed 121 ℃ autoclave sterilization.
2. Ergonomic design.
3. Comply with ISO9000 and GLP regulations, users can be calibrated independently. Digital adjustable pipette calibration without tools. High precision and error factor at the same time.
4. The pipette nozzles have a unique V-ring that can fit different brands of pipettes.
5. Each multi-channel pipette gift each pipette gift German original: can be autoclaved tip box (built-in 96 tips) 1; pipette bracket 1; PP with a lid reagent pool 1; tip box loading rack 1; 5.5. Viton sealing ring, silicone oil and installation tools 1 set.
Pipette tip box common faults and solutions.
1, such as not in use, the pipette range to zui big value of the scale, so that the spring is in a state of relaxation to protect the spring.
2, zui good regular cleaning pipette gun, you can use soapy water or 60% of isopropyl alcohol, and then distilled water cleaning, natural drying.
3、Before high temperature sterilization, make sure the pipette can adapt to high temperature.
4、Calibration is possible in a 20-25 degree environment by repeating the method of weighing distilled water several times.
5、Check for liquid leakage when using. Methods when sucking up the liquid after the suspension of vertical placement for a few seconds to see if the liquid level drops.
sweep
